After using the raincoat, it is best to wipe it with a dry cloth and dry it naturally in a cool place, not in the hot sun.
Do not rub when washing raincoats, as this will detach the PVC and nylon fabrics, allowing air to penetrate and foam.
Maintenance of rubber raincoats
1. Storage method of rubber raincoat
When collecting the rubber raincoat, you can lining the newspaper in the interlayer, or sprinkle a layer of prickly heat powder and then fold it, so that it will not stick after a long time of storage.
2, rubber raincoat odor removal method
When the rubber raincoat has an odor, you can mix hydrogen peroxide into the water to soak the raincoat, and the odor will disappear after drying.
Maintenance of plastic raincoats
1, plastic raincoat wrinkle removal method
If the raincoat gets slightly wrinkled, hang it on a hanger and let it straighten out naturally. If the wrinkles are tight, you can soak the raincoat in hot water at about 70°C for 2 minutes, take it out and put it on a flat plate to flatten it, and then wipe off the water marks to restore it to a flat surface. Be careful not to pull it hard.
2, plastic raincoat sticky repair method
If the plastic raincoat is broken, you can align the break first, put a piece of cellophane on it, and then press it with a hot iron bar a few times. It’s glued. For holes, you can use the same plastic cloth to cut into squares or circles slightly larger than the holes, cover the holes, then cover with cellophane, and use the same method to heat and glue them.