Modern society often uses raincoats made of plastic films or treated rainproof cloths. These raincoats have the advantages of simple production, light weight and softness, many varieties of colors and low prices. There are many kinds of common raincoat fabrics in life, including nylon oxford fabric, coated fabric, polyester fabric, PTFF (polytetrafluoroethylene), Gore-Tex fabric, etc., but for outdoor sportsmen, the raincoat fabric needs to be both comfortable. , breathability. We can customize all kinds of raincoat logos for you. Here are 3 kinds of raincoat logo printing processes:
Water slurry printing process
Glue printing process
Foam printing process
Water slurry printing process introduce.
The water slurry printing process is the most basic printing process in the screen printing industry. It can be printed on almost all light-colored fabrics such as cotton, polyester, linen, etc., and is widely used. It works similar to dyeing, except that it “dyes” an area of the fabric to the desired color for the flower position. Therefore, this process cannot be applied on dark-colored fabrics. The biggest advantage of the water slurry printing process is that it is widely used, has good flower fastness, and can print good results at a relatively low price. The limitation of the water slurry printing process is that it cannot be applied on all dark fabrics.
Glue printing process introduce.
The mucilage printing process uses a special chemical gel to mix with dyes for a high degree of seamlessness. The dye is firmly attached to the fabric through the medium of the gel, and the glue printing process overcomes the limitations of water-based printing. Its characteristics are that it is suitable for printing of various color depths and materials. It can be printed on cotton, linen, viscose, polyester, nylon, polypropylene, polyvinyl chloride and blended fabrics of various fibers, and can also be printed on leather, artificial leather and other materials. It can be used for fluorescent printing, inkjet printing, burnt-out printing, electrostatic flocking printing and other printing processes. The biggest advantage of the glue printing process is that it has a wide range of applications, beautiful colors and high degree of reduction, but its printing process is more complicated than the water slurry printing process, and the cost is relatively high.
Foam printing process introduce.
Foaming printing is also called three-dimensional printing. The foaming printing process is developed on the basis of the mucilage printing process. After drying, it is foamed at a high temperature of 200-300 degrees to achieve a three-dimensional effect similar to “relief”. The foaming printing process can make high, medium and low foaming effects according to the requirements of the substrate, which is very eye-catching. The biggest advantage of the foam printing printing process is that the three-dimensional effect is strong, and the printing surface is prominent and expanded. Widely used in cotton, nylon and other materials.